Grunnþekking á vökvakælingu

      Liquid cooling heatsinks are still relatively new to most people. However, with the popularity of liquidcooling heatsink, more and more people use liquid cooling, or intend to try to use it. What should we pay attention to before buying and installing liquid cooling hetasink module.

Fljótandi rás:

     The distance between water pipes shall be as short as possible. The water pipes shall not be wound around casually, and shall be as regular as possible, so that the internal space will not look too messy, which is also conducive to the internal heat dissipation.

Rör:

    There are three kinds of liquid tube: silica gel, PVC and PU. Silica gel has the best applicability, but transparent silica gel and Pu are easy to change color. After a long time, they will basically turn yellow. PVC pipes are not easy to change color, but they are easy to harden. When walking the pipe, do not turn 90 degrees or 180 degrees, which will increase the resistance and slow down the water flow. Use 45 degrees turning elbow or 90 degrees slow elbow as far as possible.

Vatnstankur:

    The water column water tank is better. The bubble discharge of the optical drive water tank is a big problem, and if it is cracked, it will have a great impact, and the liquid is easy to immerse into the hard disk. Good optical drive position water tanks are generally very expensive. Cheap optical drive position water tanks are pasted and assembled with cheap boards, and the quality is unreliable. The cylindrical water tank is integrally formed with reliable technology and low price.

Dæla:

    DDC water pump is the most widely used. Because it is a high head water pump, it is easy to deal with the resistance of the water cooling system and easy to maintain.

Kælikerfi:

    The cooling  system is best made of copper material, which has the highest heat dissipation efficiency. If aluminum is used, not only the heat dissipation effect is not good, but also it is easy to corrode the water cooling system. In addition, if the cold head has not been surface treated, ido not used. It is easy to corrode after long-term use. The coolant shall be produced by well-known brand manufacturers with high quality and reliability.